#Mac mini hard drive upgrade for mac#
#Mac mini hard drive upgrade serial#
#Mac mini hard drive upgrade full#

Then, take the three springs you removed earlier and place them back onto their corresponding antenna posts, followed by the antennas themselves. Use the four screws to secure the drive in place and reattach the ribbon cable.

With the hard drive in place, it's now time to place the CD drive back into the Mac Mini. Replace the four screws to secure the drive and reattach the temperature sensor - it should have enough adhesive left on it to stick. There are two anti-static cushions on the back of the hard drive, peel both of these cushions off of the old drive and place them onto your new one, which you can then slide into the slot. Gently lift the sensor, move the wire to the side, slide the drive up slightly, and remove it using the tweezers. There is a temperature sensor on the top of the drive and a wire running down the left side. It's held in with four screws, two on the top and two on the side. The hard drive is on the back of the CD drive. Make sure you are removing the screws that connect the drive to the case and not the ones on the actually CD drive. Unscrew the four screws that hold the CD drive into place and detach the ribbon cable on the top of the drive.

The hard drive is located on back of the CD drive. Under each antenna are springs - don't lose these as they are required when reassembling the device.

The two smaller ones on the left simply lift out, while larger one on the right must be squeezed from the bottom. Next, you have to remove the three antennas. You will hear a faint pop as the clips become dislodged, at which point the cover can be lifted off. Bend the knife away from you as you slowly work your way around all fours edges of the device. Gently shimmy the knife in between the base of the Mac Mini and the case. The cover on the Mac Mini is held in place with small clips that must be dislodged with the putty knife. Your current drive (if it's still functional) can be backed up using a program like Apple's Time Machine or the free utility SuperDuper. I also recommend picking up a can of compressed air to clean out the dust that has built up throughout the years.

#Mac mini hard drive upgrade serial#

Pre-2010 Mac Mini models support a single Serial ATA drive with speeds of 3 GB/s. You will need a putty knife or small paint scraper to remove the Mac Mini's casing, a Phillips head #2 screwdriver, a pair of tweezers, and either a replacement 2.5-inch solid-state drive or a hard drive with a height of no more than 9.5mm.

Apple redesigned the Mac Mini line in 2010 to include a removable cover that gives users quick and easy access to the hard drive and memory.

#Mac mini hard drive upgrade for mac#

Here's what you need to know: Note: This how-to guide is for Mac Mini models from 2005 through 2009.

#Mac mini hard drive upgrade full#

Rather than spending $600 on a newer model, you can swap out your full or faulty hard drive for a newer and faster one. There isn't a real need to upgrade, though. We were one of them, but wouldn't you know it, the hard drive in our 2009 Mac Mini has taken its last breath. Given that Apple doesn't give Mac Mini owners many reasons to upgrade, there are a still a good amount of happy customers using older models. In fact, the latest model hasn't even been updated to include Intel's newer and more efficient Haswell processors, despite the iMac, Macbook Air, and Macbook Pro receiving updates. Since it first debuted in 2005, the small computer has only seen one major redesign in 2010, and is often left out of the company's dazzling press events. The Mac Mini is like Apple's forgotten stepchild.